Joint selector

Filter the exact non-tubular AWS D1.1/D1.1M:2025 Figures 5.1 and 5.2 CJP/PJP rows by unit system, process and position.

View result ↓

Find a code detail

Code unit system

Weld type

Welding process

Welding position

If applying note e, is the selected GMAW/FCAW process non-short-circuiting? optional

Construction optional

Detail designation optional

Optional member thicknesses

Member thickness T1 optional

Member thickness T2 optional

Member thickness T3 optional

Only enter a value when the selected detail identifies a third member thickness.

RESULTExample

—

Choose the conditions to see the result.

Code screening · verify the complete WPS and project requirements

Need a WPS for a real project?

Share your project details and supporting records. We’ll review the route and scope before preparation.

Order a WPS

Scope & references AWS D1.1 / D1.1M:2025

2025 base edition with July 28, 2026 errata. AMD1 not included.

Exact detail lookup, not structural design or geometry optimization. Tubular joints, design loading, drawings and member-angle design checks are outside this lookup.

AWS D1.1/D1.1M:2025 Figures 5.1 and 5.2

All 270 separate SI and U.S. customary figure rows, with geometry, thickness conditions, position, construction, tolerance and lettered note definitions.

AWS D1.1/D1.1M:2025 Clause 5.4

Joint type, backing, backgouging, PJP depth and effective size requirements; verify complete drawing details and fabrication requirements.